Hyundai Santa Fe: Front Seat Belt / Height Adjust. Repair procedures

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body (Interior and Exterior) / Front Seat Belt / Height Adjust. Repair procedures

Replacement

1.	Remove the front seat belt upper anchor. (Refer to Front Seat Belt - "Front Seat Belt Pretensioner")

After loosening the mounting bolts, then remove the height adjust (A).

Tightening torque :

39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)

To install, reverse removal procedure.

•	Replace any damaged clips (or pin-type retainers).

Height Adjust. Components and components location

Front Seat Belt Buckle. Components and components location

Other information:

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Heater & A/C Control Unit (Manual). Components and components location

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Special service tools

Special Service Tools Tool(Number and Name) Illustration Use Deployment tool 0957A-34100A Airbag deployment tool. Use with (0957A-AL140, 0957A-AL160) Dummy 0957A-38200 Simulator to check the resistanceof each wiring harness...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.