Hyundai Santa Fe (TM): Engine Control System / Heated Oxygen Sensor (HO2S). Specifications

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Engine Control/Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S). Specifications

Specification
HO2S [Bank 1 / Sensor 1] [Euro-V]
Item
Specification
Heater Resistance (Ω)
 2.5 - 4.0 [20°C (68°F)]

HO2S [Bank 1 / Sensor 1] [Except Euro-V]
A/F Ratio (λ)
Output Voltage (V)
RICH
 Approx. 0.9
LEAN
 Approx. 0.04

Item
Specification
Heater Resistance (Ω)
 3.3 - 4.1Ω [21°C (69.8°F)]

HO2S [Bank 1 / Sensor 2]
A/F Ratio (λ)
Output Voltage (V)
RICH
 Approx. 0.9
LEAN
 Approx. 0.04

Item
Specification
Heater Resistance (Ω)
 3.3 - 4.1Ω [21°C (69.8°F)]

    Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter.

    Circuit Diagram Harness Connector [Bank 1 / Sensor 1] [Bank 1 / Sensor 2]

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Smart Key Unit. Repair procedures

    Removal Integrated Body Control Unit (IBU) 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer ti Body - "Glove Box") 3.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Compressor. Repair procedures

    Removal 1. If a compressor is available, the air conditioner is operated for a few minutes in the engine idle state and then the engine is stopped. 2. Disconnect the negative (-) battery terminal.

    Categories

     
    Copyright © 2026 www.hsafe4.com - 0.0271