Hyundai Santa Fe: Manual heating and air conditioning / Fan speed control. Air conditioning. OFF mode
Fan speed control
The fan speed can be set as desired by pushing the fan speed control button.
More air is delivered with higher fan speeds.
Pressing the OFF button turns off the fan.
NOTICE
Operating the fan when the ignition switch is in the ON position could cause
the battery to discharge. Operate the fan when the engine is running.
Air conditioning
Push the A/C button to turn the air conditioning system on (indicator light will
illuminate).
Push the button again to turn the air conditioning system off.
OFF mode
Push the OFF button to turn the climate control system off. However, you can
still operate the mode and air intake buttons as long as the ignition switch is
in the ON position.
This is used to select the outside (fresh) air position or recirculated air position.
To change the air intake control position, push the control button...
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position...
Other information:
Inspection
▶ Inspection flow of the position switch
▶ Items to check
1.
Inspect DTC code.
2.
Inspect whether N setting matches.
–
Adjust N setting
(Refer to Automatic Transaxle Control System - "Position Switch")
3...
Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) by
moving it up and down or from side to side and tighten the bolt.
2.
Adjust the hood height by moving the hood overslam bumpers (C) up and
down...
Categories
Speedometer
.png)
The speedometer indicates the speed of the vehicle and is calibrated in miles
per hour (MPH) and/or kilometers per hour (km/h).
Tachometer
.png)
read more