Hyundai Santa Fe: Inside rearview mirror / Electric Chromic Mirror (ECM)
.png)
[A] : Indicator
Some vehicles come equipped with an electrochromic mirror that helps control
glare while driving at night or under low light driving conditions.
When the engine is running, the glare is automatically controlled by the sensor
mounted in the rearview mirror. The sensor detects the light level around the vehicle,
and automatically adjusts to control the headlight glare from vehicles behind you.
Whenever the the gear is shifted to R (Reverse), the mirror will automatically
go to the brightest setting in order to improve the driver’s view behind the vehicle.
Before driving your vehicle, check to see that your inside rearview mirror is
properly positioned. Adjust the rearview mirror so that the view through the rear
window is properly centered...
[A]: Day, [B]: Night
Make this adjustment before you start driving and while the day/night lever is
in the day position.
Pull the day/night lever towards you to reduce glare from the headlights of the
vehicles behind you during night driving...
Other information:
Prerequisite for activation
ISG system operates in the following situations.
The driver's seatbelt is fastened
The driver's door and hood are closed
The brake vacuum pressure is adequate
The battery sensor is activated and the battery is sufficiently charged
Outside temperature is not too low or too high
The vehicle is driven over a constant speed and stops
The climate control system satisfies the conditions
The vehicle is sufficiently warmed up
ISG related parts are working properly
The incline is gradual
The steering wheel is turned less than 180 degrees and then the vehicle
stops
Information
If the ISG light (white) is turned on on the instrument cluster and does not
meet the ISG system operating conditions, the ISG system is not activated...
The SRS consists of the following components:
(1) Driver's front air bag module
(2) Passenger's front air bag module
(3) Side air bag modules
(4) Curtain air bag modules
(5) Retractor pre-tensioner
(6) Air bag warning light
(7) SRS control module (SRSCM)/ Rollover sensor
(8) Front impact sensors
(9) Side impact sensors
(10) Side pressure sensors
(11) Seat belt buckle sensor
(12) Emergency fastening device system
(13) Occupant classification system
The SRSCM continually monitors all SRS components while the ignition switch is
ON to determine if a crash impact is severe enough to require air bag deployment
or pre-tensioner seat belt deployment...
Categories
Speedometer
.png)
The speedometer indicates the speed of the vehicle and is calibrated in miles
per hour (MPH) and/or kilometers per hour (km/h).
Tachometer
.png)
read more