Hyundai Santa Fe (TM): Automatic Transaxle Control System / Description and operation
| Description |
| • |
Automatic transaxle system relies on various measurement data to determine
the current control status and extrapolate the necessary compensation
values.extrapolate the necessary compensation values.
|
| • |
These values are used to control the actuators and achieve the desired
control output.
|
| • |
If a problem with the drivetrain, including the transaxle, has been
identified, perform self-diagnosis and basic transaxle inspection (oil
and fluid inspection) and then check the control system's components
using the diagnosis tool.
â–¶ Control System Composition
|
Adjustment TCM Learning 1. Overview and purpose of learning 1) The purpose is to ensure the initial operation safety by correcting the oil pressure differences between transmissions.
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Smart Key. Repair procedures
Smart Key Smart Key Code Saving 1. Connect the DLC cable of diagnostic tool to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on diagnostic tool. 2.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Parking Distance Warning (PDW)
Description and operation Description • PDW consists of 8 sensors (front : 4 units, rear : 4 units) that are used to detect obstacles and transmit the result in three separate warning levels, the first, second and third to IBU via LIN communication.
Categories
- Manuals Home
- Hyundai Santa Fe Owners Manual
- Hyundai Santa Fe Service Manual
- Body Electrical System
- Automatic Transaxle Control System
- 4 Wheel Drive (4WD) System
- New on site
- Most important about car
