Hyundai Santa Fe (TM): Engine Control System / Variable Intake Solenoid (VIS) Valve. Description and operation

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Engine Control/Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve. Description and operation

Description
Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or closes this valve according to engine condition (Refer to below table).

Engine Condition
VIS Valve
Operation
Medium speed
 Closed
 Increasing engine performance in low engine speed by reducing intake interference among cylinders
Low / High speed
 Open
 Minimizing intake resistance by shortening intake manifold length and increasing area of air entrance

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3.

    Specification Item Specification Coil resistance (Ω) 30.0 - 35.0 [20°C (68°F)]

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Power Door Locks

    Components and components location Component Location 1. Driver power window main switch 2. IBU (Integrated Body Control Unit) 3. Door lock switch 4. Tailgate lock actuator & switch 5. Front door lock actuator & switch 6.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Rear Corner Radar System

    Description and operation Description Rear Corner Radar is a system that measures the relative speed and distance from the following vehicles by using two electromagnetic wave radar sensors attached to the rear bumper, and detects any vehicle within the blind spot zone and gives off alarm.

    Categories

     
    Copyright © 2026 www.hsafe4.com - 0.0176