Hyundai Santa Fe (TM): Seat Belt Pretensioner / Seat Belt Pretensioner (BPT). Description and operation
The Seat Belt Pretensioners (BPT) are installed inside center pillar (LH & RH).
When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt helps to reduce the severity of injury to the front seat occupants
by retracting the seat belt webbing. This prevents the front occupants from
thrusting forward and hitting the steering wheel or the instrument panel when
the vehicle crashes.
| •
|
Never attempt to measure the circuit resistance of the Seat
Belt Pretensioner (BPT) even if you are using a specified tester.
If the circuit resistance is measured with a tester, the pretensioner
will be ignited accidentally. This will result in serious personal
injury.
|
|
Components
1. Front Seat
Belt Pretensioner (BPT)
Other information:
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
3.
Loosen the mounting screws and remove the heater core cover (A).
Description
Back view camera will activate when the backup light is ON with the ignition
switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the vehicle through the
H/UNIT or the ECM (Reverse Display Room Mirror) mirror while backing-up.