| Components |

| 1. Passenger
airbag (PAB) |
Description The passenger airbag (PAB) is installed inside the crash pad and protects the front passenger in the event of a frontal crash.
Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2.
Description The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. Signal from control unit adjusts the position of the temperature door by operating the temperature switch
Removal • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.