Hyundai Santa Fe (TM): Convenience features / High Beam Assist (HBA)
High Beam Assist will automatically adjust the headlight range (switches between high beam and low beam) depending on the brightness of detected vehicles and certain road conditions.
Detecting sensor (Front view camera)
[1] : Front view camera
The front view camera is used as a detecting sensor to detect ambient light and brightness while driving.
Refer to the picture above for the detailed location of the detecting sensor.
NOTICE
Always keep the front view camera in good condition to maintain optimal performance of High Beam Assist.
For more details on the precautions of the front view camera, refer to “Forward Collision-Avoidance Assist (FCA)” section in chapter 7.
Exterior lights Lighting control To operate the lights, turn the knob at the end of the control lever to one of the following positions: 1. OFF 2. AUTO headlight 3.
With the engine on, select 'light -> High Beam Assist (or HBA (High Beam Assist))’ from the Settings menu to turn on High Beam Assist and deselect to turn off the system.
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Intake Actuator. Components and components location
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Rear Evaporator Core. Repair procedures
Replacement 1. Remove the rear heater & A/C unit. (Refer to Rear Heater - "Rear Heater Unit") 2. Loosen the mounting screws and remove the rear A/C lower case (A).