Hyundai Santa Fe (TM): General Information / General Tightening Torque Table

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / General Information / General Tightening Torque Table

Tightening Torque Table of Standard Parts
BOLT (Nominal diameter)
NUT (Nominal diameter)


BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
 0.8 (0.031)
2.0 - 3.0 (0.2 - 0.3, 1.4 - 2.2)
4.9 - 6.9 (0.5 - 0.7, 3.6 - 5.1)
7.8 - 10.8 (0.8 - 1.1, 5.8 - 8.0)
M6
 1 (0.039)
2.9 - 4.9 (0.3 - 0.5, 2.2 - 3.6) 
8.8 - 12.7 (0.9 - 1.3, 6.5 - 9.4) 
13.7 - 18.6 (1.4 - 1.9, 10.1 - 13.7)
M8
 1.25 (0.049)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
22.6 - 30.4 (2.3 - 3.1, 16.6 - 22.4) 
33.3 - 44.1 (3.4 - 4.5, 24.6 - 32.5)
M10
 1.5 (0.059)
16.7 - 22.6 (1.7 - 2.3, 12.3 - 16.6)
45.1 - 60.8 (4.6 - 6.2, 33.3 - 44.8)
65.7 - 88.3 (6.7 - 9.0, 48.5 - 65.1)
M12
 1.75 (0.068)
29.4 - 39.2 (3.0 - 4.0, 21.7 - 28.9)
78.5 - 105.9 (8.0 - 10.8, 57.9 - 78.1)
114.7 - 154.9 (11.7 - 15.8, 84.6 - 114.3)
M14
 2 (0.078)
47.1 - 63.7 (4.8 - 6.5, 34.7 - 47.0)
125.5 - 169.7 (12.8 - 17.3, 92.6 - 125.1)
183.4 - 249.1 (18.7 - 25.4, 135.3 - 183.7)
M16
 2 (0.078)
73.5 - 100.0 (7.5 - 10.2, 54.2 - 73.8)
197.1 - 266.7 (20.1 - 27.2, 145.4 - 196.7)
288.3 - 390.3 (29.4 - 39.8, 212.7 - 287.9)
M20
 2.5 (0.098)
144.2 - 195.2 (14.7 - 19.9, 106.3 - 143.9)
396.2 - 535.4 (40.4 - 54.6, 292.2 - 394.9)
565.8 - 764.9 (57.7 - 78.0, 417.3 - 564.2)
M24
 3 (0.118)
249.1 - 337.3 (25.4 - 34.4, 183.7 - 248.8)
687.4 - 929.7 (70.1 - 94.8, 507.0 - 685.7)
975.8 - 1320.0 (99.5 - 134.6, 719.7 - 973.6)
M30
 3.5 (0.137)
499.2 - 674.7 (50.9 - 68.8, 368.2 - 497.6)
1372.9 - 1858.4 (140.0 - 189.5, 1012.6 - 1370.7)
1956.4 - 2647.8 (199.5 - 270.0, 1443.0 - 1952.9)

BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
 0.5 (0.019)
2.0 - 3.0 (0.2 - 0.3, 1.4 - 2.2)
5.9 - 8.8 (0.6 - 0.9, 4.3 - 6.5)
8.8 - 12.7 (0.9 - 1.3, 6.5 - 9.4)
M6
 0.75 (0.029)
3.9 - 4.9 (0.4 - 0.5, 2.9 - 3.6)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
14.7 - 20.6 (1.5 - 2.1, 10.8 - 15.2)
M8
 1 (0.039)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
24.5 - 32.4 (2.5 - 3.3, 18.1 - 23.9)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
M10
 1.25 (0.049)
17.7 - 23.5 (1.8 - 2.4, 13.0 - 17.4)
47.1 - 63.7 (4.8 - 6.5, 34.7 - 47.0)
69.6 - 94.1 (7.1 - 9.6, 51.4 - 69.4)
M12
 1.25 (0.049)
32.4 - 44.1 (3.3 - 4.5, 23.9 - 32.5)
86.3 - 117.7 (8.8 - 12.0, 63.7 - 86.8)
127.5 - 172.6 (13.0 - 17.6, 94.0 - 127.3)
M14
 1.5 (0.059)
51.0 - 69.6 (5.2 - 7.1, 37.6 - 51.4)
136.3 - 185.3 (13.9 - 18.9, 100.5 - 136.7)
201.0 - 271.6 (20.5 - 27.7, 148.3 - 200.4)
M16
 1.5 (0.059)
79.4 - 107.9 (8.1 - 11.0, 58.6 - 79.6)
211.8 - 286.4 (21.6 - 29.2, 156.2 - 211.2)
311.8 - 421.7 (31.8 - 43.0, 230.0 - 311.0)
M20
 1.5 (0.059)
163.8 - 221.6 (16.7 - 22.6, 120.8 - 163.5)
448.2 - 607.0 (45.7 - 61.9, 330.5 - 447.7)
639.4 - 864.9 (65.2 - 88.2, 471.6 - 638.0)
M24
 2 (0.078)
276.5 - 373.6 (28.2 - 38.1, 204.0 - 275.6)
759.0 - 1026.8 (77.4 - 104.7, 559.8 - 757.3)
1080.7 - 1462.2 (110.2 - 149.1, 797.1 - 1078.4)
M30
 2 (0.078)
562.9 - 762.0 (57.4 - 77.7, 415.2 - 562.0)
1553.4 - 2102.5 (158.4 - 214.4, 1145.7 - 1550.8)
2210.4 - 2991.0 (225.4 - 305.0, 1630.3 - 2206.1)

Flange BOLT (Nominal diameter)
Flange NUT (Nominal diameter)


Flange BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
 0.8 (0.031)
2.0 - 2.9 (0.2 - 0.3, 1.4 - 2.2)
5.9 - 7.8 (0.6 - 0.8, 4.3 - 5.8)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
M6
 1 (0.039)
3.9 - 4.9 (0.4 - 0.5, 2.9 - 3.6)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
14.7 - 19.6 (1.5 - 2.0, 10.8 - 14.5)
M8
 1.25 (0.049)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
24.5 - 32.4 (2.5 - 3.3, 18.1 - 23.9)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
M10
 1.5 (0.059)
17.7 - 24.5 (1.8 - 2.5, 13.0 - 18.1)
48.1 - 65.7 (4.9 - 6.7, 35.4 - 48.5)
70.6 - 96.1 (7.2 - 9.8, 52.1 - 70.9)
M12
 1.75 (0.068)
31.4 - 43.1 (3.2 - 4.4, 23.1 - 31.8)
84.3 - 113.8 (8.6 - 11.6, 62.2 - 83.9)
123.6 - 167.7 (12.6 - 17.1, 91.1 - 123.7)
M14
 2 (0.078)
51.0 - 68.6 (5.2 - 7.0, 37.6 - 50.6)
135.3 - 182.4 (13.8 - 18.6, 99.8 - 134.5)
198.1 - 268.7 (20.2 - 27.4, 146.1 - 198.2)
M16
 2 (0.078)
79.4 - 107.9 (8.1 - 11.0, 58.6 - 79.6)
212.8 - 288.3 (21.7 - 29.4, 157.0 - 212.7)
311.8 - 421.7 (31.8 - 43.0, 230.0 - 311.0)

Flange BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
 4T
 8T
 10T

M5
 0.5 (0.019)
2.9 - 2.9 (0.3 - 0.3, 2.2 - 2.2)
6.9 - 8.8 (0.7 - 0.9, 5.1 - 6.5)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
M6
 0.75 (0.029)
3.9 - 5.9 (0.4 - 0.6, 2.9 - 4.3)
10.8 - 14.7 (1.1 - 1.5, 8.0 - 10.8)
16.7 - 21.6 (1.7 - 2.2, 12.3 - 15.9)
M8
 1 (0.039)
9.8 - 12.7 (1.0 - 1.3, 7.2 - 9.4)
26.5 - 35.3 (2.7 - 3.6, 19.5 - 26.0)
38.2 - 52.0 (3.9 - 5.3, 28.2 - 38.3)
M10
 1.25 (0.049)
19.6 - 25.5 (2.0 - 2.6, 14.5 - 18.8)
51.0 - 68.6 (5.2 - 7.0, 37.6 - 50.6)
75.5 - 102.0 (7.7 - 10.4, 55.7 - 75.2)
M12
 1.25 (0.049)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
94.1 - 126.5 (9.6 - 12.9, 69.4 - 93.3)
138.3 - 186.3 (14.1 - 19.0, 102.0 - 137.4)
M14
 1.5 (0.059)
55.9 - 75.5 (5.7 - 7.7, 41.2 - 55.7)
148.1 - 200.1 (15.1 - 20.4, 109.2 - 147.6)
216.7 - 293.2 (22.1 - 29.9, 159.8 - 216.3)
M16
 1.5 (0.059)
86.3 - 116.7 (8.8 - 11.9, 63.7 - 86.1)
229.5 - 309.9 (23.4 - 31.6, 169.3 - 228.6)
336.4 - 455.0 (34.3 - 46.4, 248.1 - 335.6)

  
1)
The torques shown in the table are standard values under the following conditions.
•
Nuts and bolts are made of galvanized steel bar.
•
Galvanized plain steel washers are inserted.
•
All nuts, bolts and plain washers are dry.
2)
The torques shown in the table are not applicable.
•
When spring washers, toothed washers and the like are inserted.
•
If plastic parts are fastened.
•
If self-tapping screws or self-locking nuts are used.
•
If threads and surfaces are coated with oil.

    Important Safety Notice Proper service methods and repair procedures are essential for safe, reliable operation of all motor vehicles as well as personal safety of the operator.

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Description and operation

    Description and operation    The System may be limited when • The radar sensor or camera is blocked with a foreign object or debris.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Front Radar Unit. Repair procedures

    Inspection Inspection procedure for vehicle with Forward Collision-Avoidance Assist and Smart Cruise Control system failure 1. Check the bumper appearance for accident (check the vehicle appearance visually and see bumper replacement history).

    Categories

     
    Copyright © 2026 www.hsafe4.com - 0.0224