Hyundai Santa Fe (TM): Seat belt restraint system / Stowing the rear seat belt
- The rear seat belt buckles can be stowed in the pocket between the rear seatback and cushion when not in use.
- Routing the seat belt webbing through the rear seat belt guides will help keep the belts from being trapped behind or under the seats.
After inserting the seat belt, tighten the belt webbing by pulling it up.
CAUTION
When using the seat belt, use it after taking it out of the guides.
If you pull the seat belt when it is stored in the guides, it may damage the guides and/or belt webbing.
1. Insert the tongue plate (1) into the buckle (2) until an audible “click" is heard, indicating the latch is locked. Make sure the belt is not twisted.
Your vehicle is equipped with driver’s and front passenger’s Pre-tensioner Seat Belts(Retractor Pretensioner and Emergency Fastening Device System).
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Blower Unit. Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/recycling/charging station. 3. When the engine is cool, drain the engine coolant from the radiator.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Specifications
Specifications [ADAS_PRK Application Specification (MOBIS)] Item Specification Ultrasonic sensor Voltage rating DC 12V Detecting range 40cm ~ 120cm Operating voltage DC 9V ~ 16V Operation curr
Categories
- Manuals Home
- Hyundai Santa Fe Owners Manual
- Hyundai Santa Fe Service Manual
- Description and operation
- Convenience features
- Vehicle Information, Consumer Information and Reporting Safety Defects
- New on site
- Most important about car
