Hyundai Santa Fe: Installing a Child Restraint System (CRS) / Securing a Child Restraint System with the “LATCH Anchors System”
To install a LATCH-compatible Child Restraint System in either of the rear outboard
seating positions:
1. Move the seat belt buckle away from the lower anchors.
2. Move any other objects away from the anchorages that could prevent a secure
connection between the Child Restraint System and the lower anchors.
3. Place the Child Restraint System on the vehicle seat, then attach the seat
to the lower anchors according to the instructions provided by the Child Restraint
System manufacturer.
4. Follow the instructions of the Child Restraint System’s manufacturer for proper
installation and connection of the lower attachments on the Child Restraint System
to the lower anchors.
WARNING
Take the following precautions when using the LATCH system:
- Read and follow all installation instructions provided with your Child
Restraint System.
- To prevent the child from reaching and taking hold of unretracted seat
belts, buckle all unused rear seat belts and retract the seat belt webbing behind
the child. Children can be strangled if a shoulder belt becomes wrapped around
their neck and the seat belt tightens.
- NEVER attach more than one Child Restraint System to a single anchorage.
This could cause the anchor or attachment to come loose or break.
- Always have the LATCH system inspected by your dealer after an accident.
An accident can damage the LATCH system and may not properly secure the Child
Restraint System.
NOTICE
The recommended weight for the LATCH system is under 65 lb. (30 kg).
How to determine an appropriate child restraint weight: Child weight + Child
restraint weight < 65 lb. (30kg)
The LATCH system holds a Child Restraint System during driving and in an accident.
This system is designed to make installation of the Child Restraint System easier
and reduce the possibility of improperly installing your Child Restraint System...
First secure the child restraint with the LATCH lower anchors or the seat belt.
If the child restraint manufacturer recommends that the top tether strap be attached,
attach and tighten the top tether strap to the top tether strap anchor...
Other information:
Description
Integrated Rain Sensor
Integrated rain sensor (A) controls three systems: front wiper, auto-light,
and central air conditioner.
1.
Wiper Control System
When "AUTO" switch signal is received from the multi-function switch
on the right, the integrated rain sensor detects the amount of rainfall...
If the driver turns off the engine when the sunroof is not fully closed, the
warning chime will sound for several seconds and the sunroof open warning will appear
on the cluster LCD display.
Close the sunroof securely when leaving your vehicle.
CAUTION
Make sure the sunroof is closed fully when leaving your vehicle...