Hyundai Santa Fe: Seat Belt Pretensioner / Seat Belt Pretensioner (BPT). Repair procedures

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Restraint / Seat Belt Pretensioner / Seat Belt Pretensioner (BPT). Repair procedures

Removal

1.	Disconnect the battery negative cable, and wait for at least three minutes before beginning work.

2.	Remove the front anchor seat belt (A).

3.	Remove the center pillar lower trim. (Refer to Body - "Center Pillar Trim")

4.	Remove the center pillar upper trim. (Refer to Body - "Center Pillar Trim")

5.	After loosening the mounting bolt, then remove the front seat belt lower anchor (A).

6.	Disconnect the seat belt pretensioner connector (A) and then remove the seat belt pretensioner.

7.	Remove the seat belt pretensioner (A) after loosening the mouning bolts.

Installation

1.	Disconnect the battery negative cable and wait for at least three minutes.

Install the seat belt pretensioner.

Tightening torque

Bolt (A) : 7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)

Bolt (B) : 39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)

Install the front seat belt upper anchor bolt.

Tightening torque :

39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)

4.	Install the center pillar trim. (Refer to Body - "Center Fillar Trim")

5.	Install the door scuff trim. (Refer to Body - "Door Scuff Trim")

6.	Reconnect the battery negative cable.

After installing the seat belt pretensioner, confirm proper system operation:

•	Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.

Seat Belt Pretensioner (BPT). Components and components location

Emergency Fastening Device (EFD). Description and operation

Description The Emergency Fastening Device (EFD) operates at the same time with the Seat Belt Pretensioner when it satisifies the deployment condition after a collision...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: When the battery is discharged:

The shift buttons will not function when the battery is discharged. In emergencies, do the following to move the shift button to N (Neutral) on a level ground. 1. Connect the battery cables from another vehicle or from a another battery to the jump-starting terminals inside the engine compartment...

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Trip computer mode. Turn By Turn (TBT) mode

Trip computer mode The trip computer mode displays information related to vehicle driving parameters including fuel economy, tripmeter information and vehicle speed. For more information, refer to "Trip Computer" in this chapter. Turn By Turn (TBT) mode Turn-by-turn navigation, distance/time to destination information is displayed when Turn by Turn view is selected...