Hyundai Santa Fe: Blower / Intake Actuator. Components and components location

Description
The intake actuator is located at the blower unit. It regulates the intake door
by a signal from the control unit. Pressing the intake selection switch will
shift between recirculation and fresh air modes...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector...
Other information:
Release Residual Pressure
in Fuel Line
•
There may be some residual pressure even after "Release Residual
Pressure in Fuel Line" work, so cover the hose connection with
a shop towel to prevent residual fuel from spilling out before
disconnecting any fuel connection...
To release EPB (Electronic Parking Brake):
1. Press the Engine Start/Stop button to the ON or START position.
2. Press the EPB switch while depressing the brake pedal.
Make sure the Parking Brake warning light goes off.
Satisfy the following conditions
1...
Categories
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
WARNING
NEVER allow children in the vehicle unattended. The power seats are operable
when the vehicle is turned off.
read more