Hyundai Santa Fe (TM): General Information / General Tightening Torque Table

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / General Information / General Tightening Torque Table

Tightening Torque Table of Standard Parts
BOLT (Nominal diameter)
NUT (Nominal diameter)


BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
 0.8 (0.031)
2.0 - 3.0 (0.2 - 0.3, 1.4 - 2.2)
4.9 - 6.9 (0.5 - 0.7, 3.6 - 5.1)
7.8 - 10.8 (0.8 - 1.1, 5.8 - 8.0)
M6
 1 (0.039)
2.9 - 4.9 (0.3 - 0.5, 2.2 - 3.6) 
8.8 - 12.7 (0.9 - 1.3, 6.5 - 9.4) 
13.7 - 18.6 (1.4 - 1.9, 10.1 - 13.7)
M8
 1.25 (0.049)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
22.6 - 30.4 (2.3 - 3.1, 16.6 - 22.4) 
33.3 - 44.1 (3.4 - 4.5, 24.6 - 32.5)
M10
 1.5 (0.059)
16.7 - 22.6 (1.7 - 2.3, 12.3 - 16.6)
45.1 - 60.8 (4.6 - 6.2, 33.3 - 44.8)
65.7 - 88.3 (6.7 - 9.0, 48.5 - 65.1)
M12
 1.75 (0.068)
29.4 - 39.2 (3.0 - 4.0, 21.7 - 28.9)
78.5 - 105.9 (8.0 - 10.8, 57.9 - 78.1)
114.7 - 154.9 (11.7 - 15.8, 84.6 - 114.3)
M14
 2 (0.078)
47.1 - 63.7 (4.8 - 6.5, 34.7 - 47.0)
125.5 - 169.7 (12.8 - 17.3, 92.6 - 125.1)
183.4 - 249.1 (18.7 - 25.4, 135.3 - 183.7)
M16
 2 (0.078)
73.5 - 100.0 (7.5 - 10.2, 54.2 - 73.8)
197.1 - 266.7 (20.1 - 27.2, 145.4 - 196.7)
288.3 - 390.3 (29.4 - 39.8, 212.7 - 287.9)
M20
 2.5 (0.098)
144.2 - 195.2 (14.7 - 19.9, 106.3 - 143.9)
396.2 - 535.4 (40.4 - 54.6, 292.2 - 394.9)
565.8 - 764.9 (57.7 - 78.0, 417.3 - 564.2)
M24
 3 (0.118)
249.1 - 337.3 (25.4 - 34.4, 183.7 - 248.8)
687.4 - 929.7 (70.1 - 94.8, 507.0 - 685.7)
975.8 - 1320.0 (99.5 - 134.6, 719.7 - 973.6)
M30
 3.5 (0.137)
499.2 - 674.7 (50.9 - 68.8, 368.2 - 497.6)
1372.9 - 1858.4 (140.0 - 189.5, 1012.6 - 1370.7)
1956.4 - 2647.8 (199.5 - 270.0, 1443.0 - 1952.9)

BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
 0.5 (0.019)
2.0 - 3.0 (0.2 - 0.3, 1.4 - 2.2)
5.9 - 8.8 (0.6 - 0.9, 4.3 - 6.5)
8.8 - 12.7 (0.9 - 1.3, 6.5 - 9.4)
M6
 0.75 (0.029)
3.9 - 4.9 (0.4 - 0.5, 2.9 - 3.6)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
14.7 - 20.6 (1.5 - 2.1, 10.8 - 15.2)
M8
 1 (0.039)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
24.5 - 32.4 (2.5 - 3.3, 18.1 - 23.9)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
M10
 1.25 (0.049)
17.7 - 23.5 (1.8 - 2.4, 13.0 - 17.4)
47.1 - 63.7 (4.8 - 6.5, 34.7 - 47.0)
69.6 - 94.1 (7.1 - 9.6, 51.4 - 69.4)
M12
 1.25 (0.049)
32.4 - 44.1 (3.3 - 4.5, 23.9 - 32.5)
86.3 - 117.7 (8.8 - 12.0, 63.7 - 86.8)
127.5 - 172.6 (13.0 - 17.6, 94.0 - 127.3)
M14
 1.5 (0.059)
51.0 - 69.6 (5.2 - 7.1, 37.6 - 51.4)
136.3 - 185.3 (13.9 - 18.9, 100.5 - 136.7)
201.0 - 271.6 (20.5 - 27.7, 148.3 - 200.4)
M16
 1.5 (0.059)
79.4 - 107.9 (8.1 - 11.0, 58.6 - 79.6)
211.8 - 286.4 (21.6 - 29.2, 156.2 - 211.2)
311.8 - 421.7 (31.8 - 43.0, 230.0 - 311.0)
M20
 1.5 (0.059)
163.8 - 221.6 (16.7 - 22.6, 120.8 - 163.5)
448.2 - 607.0 (45.7 - 61.9, 330.5 - 447.7)
639.4 - 864.9 (65.2 - 88.2, 471.6 - 638.0)
M24
 2 (0.078)
276.5 - 373.6 (28.2 - 38.1, 204.0 - 275.6)
759.0 - 1026.8 (77.4 - 104.7, 559.8 - 757.3)
1080.7 - 1462.2 (110.2 - 149.1, 797.1 - 1078.4)
M30
 2 (0.078)
562.9 - 762.0 (57.4 - 77.7, 415.2 - 562.0)
1553.4 - 2102.5 (158.4 - 214.4, 1145.7 - 1550.8)
2210.4 - 2991.0 (225.4 - 305.0, 1630.3 - 2206.1)

Flange BOLT (Nominal diameter)
Flange NUT (Nominal diameter)


Flange BOLT/NUT Normal screw
Torque Nm (kg.m, Ib-ft)
Nominal diameter.
(mm)
Pitch [mm (in.) ]
4T
8T
10T

M5
 0.8 (0.031)
2.0 - 2.9 (0.2 - 0.3, 1.4 - 2.2)
5.9 - 7.8 (0.6 - 0.8, 4.3 - 5.8)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
M6
 1 (0.039)
3.9 - 4.9 (0.4 - 0.5, 2.9 - 3.6)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
14.7 - 19.6 (1.5 - 2.0, 10.8 - 14.5)
M8
 1.25 (0.049)
8.8 - 11.8 (0.9 - 1.2, 6.5 - 8.7)
24.5 - 32.4 (2.5 - 3.3, 18.1 - 23.9)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
M10
 1.5 (0.059)
17.7 - 24.5 (1.8 - 2.5, 13.0 - 18.1)
48.1 - 65.7 (4.9 - 6.7, 35.4 - 48.5)
70.6 - 96.1 (7.2 - 9.8, 52.1 - 70.9)
M12
 1.75 (0.068)
31.4 - 43.1 (3.2 - 4.4, 23.1 - 31.8)
84.3 - 113.8 (8.6 - 11.6, 62.2 - 83.9)
123.6 - 167.7 (12.6 - 17.1, 91.1 - 123.7)
M14
 2 (0.078)
51.0 - 68.6 (5.2 - 7.0, 37.6 - 50.6)
135.3 - 182.4 (13.8 - 18.6, 99.8 - 134.5)
198.1 - 268.7 (20.2 - 27.4, 146.1 - 198.2)
M16
 2 (0.078)
79.4 - 107.9 (8.1 - 11.0, 58.6 - 79.6)
212.8 - 288.3 (21.7 - 29.4, 157.0 - 212.7)
311.8 - 421.7 (31.8 - 43.0, 230.0 - 311.0)

Flange BOLT/NUT Thin screw
Torque Nm (kg.m, Ib-ft)

Nominal diameter.
(mm)
Pitch [mm (in.) ]
 4T
 8T
 10T

M5
 0.5 (0.019)
2.9 - 2.9 (0.3 - 0.3, 2.2 - 2.2)
6.9 - 8.8 (0.7 - 0.9, 5.1 - 6.5)
9.8 - 13.7 (1.0 - 1.4, 7.2 - 10.1)
M6
 0.75 (0.029)
3.9 - 5.9 (0.4 - 0.6, 2.9 - 4.3)
10.8 - 14.7 (1.1 - 1.5, 8.0 - 10.8)
16.7 - 21.6 (1.7 - 2.2, 12.3 - 15.9)
M8
 1 (0.039)
9.8 - 12.7 (1.0 - 1.3, 7.2 - 9.4)
26.5 - 35.3 (2.7 - 3.6, 19.5 - 26.0)
38.2 - 52.0 (3.9 - 5.3, 28.2 - 38.3)
M10
 1.25 (0.049)
19.6 - 25.5 (2.0 - 2.6, 14.5 - 18.8)
51.0 - 68.6 (5.2 - 7.0, 37.6 - 50.6)
75.5 - 102.0 (7.7 - 10.4, 55.7 - 75.2)
M12
 1.25 (0.049)
35.3 - 48.1 (3.6 - 4.9, 26.0 - 35.4)
94.1 - 126.5 (9.6 - 12.9, 69.4 - 93.3)
138.3 - 186.3 (14.1 - 19.0, 102.0 - 137.4)
M14
 1.5 (0.059)
55.9 - 75.5 (5.7 - 7.7, 41.2 - 55.7)
148.1 - 200.1 (15.1 - 20.4, 109.2 - 147.6)
216.7 - 293.2 (22.1 - 29.9, 159.8 - 216.3)
M16
 1.5 (0.059)
86.3 - 116.7 (8.8 - 11.9, 63.7 - 86.1)
229.5 - 309.9 (23.4 - 31.6, 169.3 - 228.6)
336.4 - 455.0 (34.3 - 46.4, 248.1 - 335.6)

  
1)
The torques shown in the table are standard values under the following conditions.
•
Nuts and bolts are made of galvanized steel bar.
•
Galvanized plain steel washers are inserted.
•
All nuts, bolts and plain washers are dry.
2)
The torques shown in the table are not applicable.
•
When spring washers, toothed washers and the like are inserted.
•
If plastic parts are fastened.
•
If self-tapping screws or self-locking nuts are used.
•
If threads and surfaces are coated with oil.

    Important Safety Notice Proper service methods and repair procedures are essential for safe, reliable operation of all motor vehicles as well as personal safety of the operator.

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Indicators And Gauges

    Troubleshooting Troubleshooting Symptom Possible cause Remedy Speedometer does not operate Cluster fuse (10A) blown Check for short and replace fuse Speedometer faulty Check speedometer CAN line faulty

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Receiver-Drier. Repair procedures

    Replacement 1. Using a Lwrench, remove the cap (A) on the bottom of the receiver-drier. 2. Remove the receiver-drier (A) from condenser using a long nose plier. Check for crumbled receiver-drier and clogged bottom cap filter.

    Categories

     
    Copyright © 2026 www.hsafe4.com - 0.0234