Hyundai Santa Fe: Heating and air conditioning / Fan speed control. Air conditioning (A/C)
Fan speed control
Turn the knob to the right to increase the fan speed and airflow. Turn the knob
to the left to decrease fan speed and airflow.
Setting the fan speed control knob to the “0” position turns off the fan.
NOTICE
Operating the fan speed when the ignition switch is in the ON position could
cause the battery to discharge. Operate the fan speed when the engine is running.
Air conditioning (A/C)
Press the A/C button to turn the air conditioning system on (indicator light
will illuminate). Press the button again to turn the air conditioning system off.
Temperature control
The temperature will increase by turning the knob to the right. The temperature
will decrease by turning the knob to the left.
Air intake control
This is used to select outside (fresh) air position or recirculated air position...
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position...
Other information:
Removal
1)
After replacing with a new power tailgate module, check for
DTC code at all times.
If DTC code B24B0 exists, perform power tailgate mode change...
Component Location
1. Head lamp
(Low)
2. Head lamp (High)
3. Daytime running light (DRL)/Positioning lamp
4. Turn signal lamp
5. Head lamp (ADD Low)
6. Side repeater
lamp
7. Overhead console lamp
8...
Categories
Vehicle Identification Number (VIN)
The vehicle identification number (VIN) is the number used in registering your
vehicle and in all legal matters pertaining to its ownership, etc.
The number is punched on the floor under the passenger seat. To check the number,
open the cover.
read more