Hyundai Santa Fe: Fuses / Engine compartment panel fuse replacement

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Maintenance / Fuses / Engine compartment panel fuse replacement

Blade fuse / Cartridge fuse

1. Turn the vehicle off.
2. Turn all other switches off.
3. Remove the fuse panel cover by pressing the tap and pulling up.
4. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
5. Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits loosely, we recommend that you consult an authorized HYUNDAI dealer.

NOTICE

After checking the fuse panel in the engine compartment, securely install the fuse panel cover. You may hear a clicking sound if the cover is securely latched. If it is not securely latched, electrical failure may occur from water contact.

Multi fuse

If the multi fuse or midi fuse is blown, we recommend that you consult an authorized HYUNDAI dealer.

Instrument panel fuse replacement

1. Turn the vehicle off. 2. Turn all other switches off. 3. Open the fuse panel cover. 4. Refer to the label on the inside of the fuse panel cover to locate the suspected fuse location...

Fuse/relay panel description

Instrument panel fuse panel Inside the fuse/relay box cover, you can find the fuse/relay label describing fuse/ relay names and ratings. Information Not all fuse panel descriptions in this manual may be applicable to your vehicle; the information is accurate at the time of printing...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Maintenance under severe usage conditions

The following items must be serviced more frequently on cars mainly used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : Inspect and if necessary, adjust, correct, clean or replace Severe driving conditions A...

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: System settings

Camera settings You can change Surround View Monitor ‘Display Contents’ or ‘Display Settings’ by touching the setup icon () on the screen while Surround View Monitor is operating, or selecting ‘Driver Assistance → Parking Safety → Camera Settings’ from the Settings menu while the engine is on...