Hyundai Santa Fe: Crash Pad / Cluster Fascia Panel. Components and components location

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body (Interior and Exterior) / Crash Pad / Cluster Fascia Panel. Components and components location

Component Location

1. Cluster Fascia Panel

Components and components location

Components (1) 1. Crash pad lower panel 2. Crash pad assembly 3. Crash pad side cover [LH] 4. Crash pad side cover [RH] Componets (2) 1...

Cluster Fascia Panel. Repair procedures

Replacement • Put on gloves to prevent hand injuries...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Coolant. Repair procedures

Refilling And Bleeding • Never remove the reservoir tank cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator...

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: System malfunction and limitations

System malfunction When Safe Exit Assist is not working properly, the ‘Check Blind-Spot Safety system(s)’ warning message will appear on the cluster, and the system will turn off automatically or the system will be limited. We recommend that the system be inspected by an authorized HYUNDAI dealer...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.