Hyundai Santa Fe: How vehicle radio works / AM (MW, LW) reception

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Convenience features / Infotainment system / How vehicle radio works / AM (MW, LW) reception

AM broadcasts can be received at greater distances than FM broadcasts. This is because AM radio waves are transmitted at low frequencies. These long, low frequency radio waves can follow the curvature of the earth rather than travelling straight out into the atmosphere.

In addition, they curve around obstructions so that they can provide better signal coverage.

How vehicle radio works

FM reception AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle...

FM radio station

FM broadcasts are transmitted at high frequencies and do not bend to follow the earth’s surface. Because of this, FM broadcasts generally begin to fade at short distances from the station...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Precautions while using the head-up display

It may sometimes be difficult to read information on the Head-Up Display in the following situations. - The driver is improperly positioned in the driver’s seat - The driver wears polarizing-filter sunglasses - An object is located above the head-up display cover - The vehicle is driven on a wet road - Any improper lighting accessory is installed inside the vehicle, or there is incoming light from outside of the vehicle - The driver wears glasses - The driver wears contact lenses When it is difficult to read the Head- Up Display information, adjust the image height or brightness level from the Settings menu in the infotainment system screen...

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Line Pressure Control Solenoid Valve (LINE_VFS). Repair procedures

Inspection • Refer to the DTC manual for the check procedure. Removal • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.