
The paddle shifter is available when the shift button is in the D (Drive) position or the manual shift mode.
With the shift button in the D position
The paddle shifter will operate when the vehicle speed is more than 6 mph.
Pull the [+] or [-] paddle shifter once to shift up or down one gear and the system changes from automatic mode to manual shift mode.
In the manual shift mode, pull the [+] or [-] paddle shifter once to shift up or down one gear.
To change back to automatic shift mode from manual shift mode, do one of the followings:
Pull the [+] paddle shifter for more than one second Press the D button.
The manual shift mode also changes back to automatic shift mode in one of following situations
- When the accelerator pedal is gently depressed for more than 6 seconds while
driving
- When the vehicle stops
Information
If the [+] and [-] paddle shifters are pulled at the same time, gear shift may not occur.
Shifting conditions not met. Reduce speed, then shift The warning message appears on the LCD display, when engine RPM is too high, or when driving speed is too fast to shift the gear.
Never move the shift button from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed. Never move the shift button into P (Park) when the vehicle is in motion.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 6.
Description • PDW consists of 8 sensors (front : 4 units, rear : 4 units) that are used to detect obstacles and transmit the result in three separate warning levels, the first, second and third to IBU via LIN communication.