Hyundai Santa Fe (TM): Heater / Mode Control Actuator. Description and operation

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Heating,Ventilation And Air Conditioning / Heater / Mode Control Actuator. Description and operation

Description
The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector.

    Components Location 1. Mode Control Actuator

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Temperature Control Actuator. Description and operation

    Description The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. Signal from control unit adjusts the position of the temperature door by operating the temperature switch

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Blower Unit. Components and components location

    Components Location 1. Blower unit assembly Components 1. Blower unit assembly 2. Inlet case [LH] 3. Inlet seal 4. Inlet case [RH] 5. Intake actuator 6.

    Categories

     
    Copyright © 2025 www.hsafe4.com - 0.0123