Hyundai Santa Fe (TM): High Beam Assist (HBA) / High Beam Assist Settings
With the engine on, select 'light -> High Beam Assist (or HBA (High Beam Assist))’ from the Settings menu to turn on High Beam Assist and deselect to turn off the system.
WARNING
For your safety, change the Settings after parking the vehicle at a safe location.
High Beam Assist will automatically adjust the headlight range (switches between high beam and low beam) depending on the brightness of detected vehicles and certain road conditions.
Display and control After selecting ‘High Beam Assist’ in the Settings menu, High Beam Assist will operate by following the procedure below. - Place the headlight switch in the AUTO position and push the headlight lever towards the instrument cluster.
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Rear Power Mosfet. Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until it reaches high speed.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Description and operation
Description and operation The System may be limited when • The radar sensor or camera is blocked with a foreign object or debris.
Categories
- Manuals Home
- Hyundai Santa Fe Owners Manual
- Hyundai Santa Fe Service Manual
- Driving your vehicle
- Fender Garnish. Repair procedures
- Four Wheel Drive (4WD) mode selection
- New on site
- Most important about car
