| Removal |
| 1. |
Remove the left luggage side trim.
(Refer to Body - "Luggage Side Trim")
|
| 2. |
Disconnect the connector (A) and then remove the release actuator (B).
|
| 3. |
Disconnect the cable (A) and then remove the release actuator.
|
| 4. |
Check for continuity between terminal No. 1 and No. 2. If there is no
continuity, replace the fuel filler door release actuator (A).
|
Component Location 1. Fuel filler door release actuator
Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.
Specifications [BCW, BCA] Items Blind-Spot Collision Warning (BCW) Blind-Spot Collision- Avoidance Assist (BCA) Blind-Spot Collision- Avoidance Assist (BCA) ※Parallel Exit Rated voltage DC 12V Operating vol