Hyundai Santa Fe (TM): Fuel Delivery System / Filler-Neck Assembly. Repair procedures
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Engine Control/Fuel System / Fuel Delivery System / Filler-Neck Assembly. Repair procedures
| Removal |
| 1. |
Turn the ignition switch OFF and disconnect the battery (-) terminal.
|
| 2. |
Lift the vehicle.
|
| 3. |
Remove the rear-left wheel & tire and wheel house cover.
|
| 4. |
Open the fuel filler cap (A) by turning it in the counterclockwise.
|
| 5. |
Separate the fuel filler hose (A).
|
| 6. |
Disconnect the ventilation hose quick-connector (B)
|
| 7. |
Disconnect the leveling hose quick-connector (C).
|
| 8. |
Remove the filler-neck assembly (A) after loosening the mounting nut
(B).
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Removal • Be careful not to damage the parts located under the vehicle (floor under cover, canister, fuel tank) when raising the vehicle using the lift.
Removal 1. Turn the ignition switch OFF and disconnect the battery (-) terminal. 2. Disconnect the accelerator position snesor connector (A).
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Rear Power Mosfet. Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until it reaches high speed.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Parking Collision-Avoidance Assist (PCA). Schematic diagrams
Categories
Copyright © 2025 www.hsafe4.com - 0.0148