Hyundai Santa Fe (TM): Interior Trim / Cowl Side Trim. Repair procedures

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Body (Interior and Exterior) / Interior Trim / Cowl Side Trim. Repair procedures

Replacement
  
•
Put on gloves to prevent hand injuries.
  
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the front door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
2.
Remove the hood latch release handle.
(Refer to Hood - "Hood Latch Release Handle")
3.
Carefully remove the front door body side weatherstrip.
4.
Using a screwdriver or remover, remove the cowl side trim (A).
5.
To install, reverse removal procedure.
  
•
Replace any damaged clips (or pin-type retainers).

    Component Location 1. Cowl Side Trim

    Component Location 1. Front Pillar Trim

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Intake Actuator. Components and components location

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Components and components location

    Categories

     
    Copyright © 2025 www.hsafe4.com - 0.013