Hyundai Santa Fe: Electronic Stability Control (ESC) / ESC OFF usage
When Driving
The ESC OFF mode should only be used briefly to help free the vehicle if stuck
in snow or mud, by temporarily stopping operation of ESC, to maintain wheel torque.
To turn ESC off while driving, press the ESC OFF button while driving on a flat
road surface.
NOTICE
To prevent damage to the transmission:
- Do not allow wheel(s) of one axle to spin excessively while the
ESC, ABS, and Parking Brake warning lights are displayed. The repairs would
not be covered by the vehicle warranty. Reduce engine power and do not spin
the wheel(s) excessively while these lights are displayed.
- When operating the vehicle on a dynamometer, make sure ESC is turned
off (ESC OFF light illuminated).
Information
Turning ESC off does not affect ABS or standard brake system operation.
ESC ON condition
When the Engine Start/Stop button is in the ON position, ESC and the ESC OFF
indicator lights illuminate for approximately three seconds...
Vehicle Stability Management is a function of the Electronic Stability Control
(ESC) system. It helps the vehicle stay stable when accelerating or braking suddenly
on wet, slippery and rough roads where traction over the four tires can suddenly
become uneven...
Other information:
Removal
1.
Turn the ignition switch OFF and disconnect the battery (-) terminal.
2.
Disconnect the battery sensor connector (A).
3.
Remove the battery sensor (A)...
Setting functions for the system
Blind-Spot Safety
With the engine on, select ‘Driver Assistance → Blind-Spot Safety’ from the Settings
menu to set whether or not to use each function.
-- If ‘Active Assist’ is selected, the system will warn the driver with a warning
message, an audible warning and braking assist will be applied depending on the
collision risk levels...
Categories

1. Inside door handle
2. Power window switches
3. Power window lock button/Electronic child safety lock button
4. Side view mirror folding button
5. Side view mirror control switch
6. Central door lock switch
7. Instrument panel illumination control switch
read more