Hyundai Santa Fe: Automatic climate control system / Automatic heating and air conditioning

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Convenience features / Automatic climate control system / Automatic heating and air conditioning

The Automatic Climate Control System is controlled by setting the desired temperature.

1. Press the AUTO button. (3)

The modes, fan speeds, air intake and air-conditioning will be controlled automatically by the temperature setting you select.

2. Turn the temperature control knob (1, 2) to the desired temperature. If the temperature is set to the lowest setting (Lo), the air conditioning system will operate continuously. After the interior has cooled sufficiently, adjust the knob to a higher temperature set point whenever possible.

To turn the automatic operation off, select any button of the following:

- Mode selection button
- Front windshield defroster button (Press the button one more time to deselect the front windshield defroster function. The ‘AUTO’ sign will illuminate on the information display once again.)
- Fan speed control button

The selected function will be controlled manually while other functions operate automatically.

For your convenience and to improve the effectiveness of the climate control, use the AUTO button and set the temperature to 73°F (23°C).

Information

Never place anything near the sensor to ensure better control of the heating and cooling system.

    Automatic climate control system

    The actual shape of air conditioner may differ from the illustration. 1. Driver’s temperature control knob 2. Passenger’s temperature control knob 3...

    Manual heating and air conditioning

    The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Heated Steering wheel. Repair procedures


    Inpection 1. Measure a resistance of NTC and Heated pad. – NTC resistance - 10.0 kΩ ± 5 % (25 °C) – Heated pad resistance - 1...

    Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Vehicle Stability Management (VSM)


    Vehicle Stability Management is a function of the Electronic Stability Control (ESC) system. It helps the vehicle stay stable when accelerating or braking suddenly on wet, slippery and rough roads where traction over the four tires can suddenly become uneven...

    Categories

    Air bag - supplemental restraint system

    1. Driver’s front air bag
    2. Passenger’s front air bag
    3. Side air bag
    4. Curtain air bag

    The vehicles are equipped with a Supplemental Air Bag System for the driver’s seat and front passenger’s seats.

    The front air bags are designed to supplement the three-point seat belts. For these air bags to provide protection, the seat belts must be worn at all times when driving.

    read more


     
    Copyright © 2024 www.hsafe4.com